Suction Cups Supports ClampsLocation DevicesFencesManifoldsAir FittingsAccessoriesRepairsCustomer ServicesProduct CatalogBlick Industries Resellers


View All Videos VIDEOS           PHOTOS
New Products
Go directly to Page: | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | Previous Page   Next Page Page 8 of 51
Blowback Sub Manifold
Part Number: 21-401-01-01
Date Added: 1/8/2009
 


  • 1 vacuum line input, 1 compressed air line input.
  • Available in most popular fitting sizes.

 


Blowback Valve
Part Number: 21-401-01-02
Date Added: 1/8/2009
 


  • 3 way, 2 position switch
  • Available in most popular fitting sizes.

 


100 X 100 mm - Low Profile Cup ( 3.94 X 3.94 in )
Part Number: 29-100-10
Date Added: 1/8/2009
 

Height:  55mm

Top Surface Area:  15 sq. in.

Base Surface Area:  15 sq. in.

Top Seal:  12-100-10-04

Bottom Seal:  12-100-10-11


  • Use these cups when working on thick blocks requiring extra Z clearance.
  • 55mm(2.17in) height version has 17mm(.67in) milled slots for mechanical hold downs, NOT available in the 50mm height version.
  • Available in most popular fitting sizes.

 


70 X 150 mm - Low Profile Cup ( 2.75 X 5.91 in )
Part Number: 29-070-10
Date Added: 1/7/2009
 

Height:  55mm

Top Surface Area:  13.75 sq. in.

Base Surface Area:  13.75 sq. in.

Top Seal:  12-070-10-04

Bottom Seal:  12-070-10-11


  • Use these cups when working on thick blocks requiring extra Z clearance.
  • 55mm(2.17in) height version has 17mm(.67in) milled slots for mechanical hold downs, NOT available in the 50mm height version.
  • Available in most popular fitting sizes.

 


Liquid Ring Vacuum Pump
Part Number: TRH-XXX
Date Added: 1/1/2009
 

We carry a complete line of liquid ring vacuum pumps for replacing worn out systems and for new installations. These pumps are direct replacements for those found in many popular CNC models. Call us or send us a quotation for help choosing the correct model.


Swivel Cup
Part Number: 12-500-02
Date Added: 10/29/2008
 

Top Surface Area:  25.60 sq. in.

Base Surface Area:  25.60 sq. in.

Top Seal:  12-500-02-04

Bottom Seal:  12-160-01-11

 

  View Photos

 Click here for more information

 
This cup is adjustable in height and is used for placing workpieces on an angle. Recommended for 3 axis CNC machines without a tilting head.

Diameter: 151mm (5.94")
Vertical Height Range: 155mm to ~210mm
Maximum Swivel Angle: ~15 Degrees


Product Catalog
Part Number: CATALOG
Date Added: 8/15/2008
 


Blick Industries Product Catalog


Retractable Cup
Part Number: 12-200-02
Date Added: 3/5/2008
 

Top Surface Area:  41 sq. in.

Base Surface Area:  41 sq. in.

Top Seal:  12-200-01-04

Bottom Seal:  12-200-01-11

 

  View Videos

 

Raised Height: 200 mm
Retracted Height: 125 mm
Suction Cup Top Diameter: 200 mm

This cup allows sink cutouts to be automatically lowered after routing to provide clearance for profiliing and polishing.
 
Helpful Ordering Information


Go directly to Page: | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | Previous Page   Next Page Page 8 of 51
 
2245 Laguna Canyon Road, Laguna Beach, CA 92651 USA, (949) 499-5026, Fax (949) 499-1398  
E-Mail:info@blickindustries.com     Blick Industries on LinkedIn