Suction Cups Supports ClampsLocation DevicesFencesManifoldsAir FittingsAccessoriesRepairsCustomer ServicesProduct CatalogBlick Industries Resellers


View All Videos VIDEOS           PHOTOS
New Products
Go directly to Page: | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | Previous Page   Next Page Page 7 of 51
Edge Clamp - Large
Part Number: 13-300-01
Date Added: 5/13/2009
 

Method:  Mechanical Screw

Range:  Clamps up to 4cm Material

Top Clamp: 2.625 in depth X 6 in width (66 X 152mm)

Closed Clamp Distance: 3cm (1.81")

 

  View Photos


  • Provide extra support for fragile regions such as sink rails, to prevent corner blowout, or to prevent small pieces from moving.
  • Designed to mount on all of Blick suction cups and supports.
  • Low profile unlike a C Clamp.
  • Handle included.
  • Non-marking.

  


Edge Clamp - Small
Part Number: 13-300-02
Date Added: 5/13/2009
 

Method:  Mechanical Screw

Range:  Clamps up to 4cm Material

Top Clamp: 2.625 in depth X 3 in width (66 X 76mm)

Closed Clamp Distance: 3cm (1.81")

 

  View Photos


  • Provide extra support for fragile regions such as sink rails, to prevent corner blowout, or to prevent small pieces from moving.
  • Designed to mount on all of Blick suction cups and supports.
  • Low profile unlike a C Clamp.
  • Handle included.
  • Non-marking.

  


V-Groove Positioning Stop
Part Number: 11-901-01
Date Added: 3/1/2009
 

Stop Diameter:   26 mm

Base Dimensions:  150 mm Ø (5.91") Diameter

Used to position the glass.
 


V-Groove Fence
Part Number: 15-701-01
Date Added: 3/1/2009
 

Base Surface Area:  21.13 sq. in.

Bottom Seal:  15-701-01-11


 

  • Used to hold the glass in place while V-Grooving.

 


200 X 200 mm - Low Profile Cup ( 7.87 X 7.87 in )
Part Number: 29-200-10
Date Added: 1/12/2009
 

Height:  55mm

Top Surface Area:  57.5 sq. in.

Base Surface Area:  57.5 sq. in.

Top Seal:  12-200-10-04

Bottom Seal:  12-200-10-11


  • Use these cups when working on thick blocks requiring extra Z clearance.
  • 55mm(2.17in) height version has 17mm(.67in) milled slots for mechanical hold downs, NOT available in the 50mm height version.
  • Available in most popular fitting sizes.

 


150 X 150 mm - Low Profile Cup ( 5.91 X 5.91 in )
Part Number: 29-150-10
Date Added: 1/9/2009
 

Height:  55mm

Top Surface Area:  31.25 sq. in.

Base Surface Area:  31.25 sq. in.

Top Seal:  12-150-10-04

Bottom Seal:  12-150-10-11


  • Use these cups when working on thick blocks requiring extra Z clearance.
  • 55mm(2.17in) height version has 17mm(.67in) milled slots for mechanical hold downs, NOT available in the 50mm height version.
  • Available in most popular fitting sizes.

 


Blowback Kit
Part Number: 21-401-01
Date Added: 1/8/2009
 
 

  View Photos


  • Switches between vacuum and compressed air.
  • Includes the Blowback Switch and the Blowback Manifold
  • Available in most popular fitting sizes.
  • Click for descripition

 


Go directly to Page: | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | Previous Page   Next Page Page 7 of 51
 
2245 Laguna Canyon Road, Laguna Beach, CA 92651 USA, (949) 499-5026, Fax (949) 499-1398  
E-Mail:info@blickindustries.com     Blick Industries on LinkedIn