Suction Cups Supports ClampsLocation DevicesFencesManifoldsAir FittingsAccessoriesRepairsCustomer ServicesProduct CatalogBlick Industries Resellers


View All Videos VIDEOS           PHOTOS
New Products
Go directly to Page: | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | Previous Page   Next Page Page 6 of 51
90 mm Round - Low Profile ( 3.54 in )
Part Number: 29-090-01
Date Added: 6/1/2009
 

Height:  55mm

Top Surface Area:  9.9 sq. in.

Base Surface Area:  9.9 sq. in.

Top Seal:  12-090-01-04

Bottom Seal:  12-090-01-11

Helpful Ordering Information
 
Use these cups when working on thick blocks requiring extra Z clearance.
 


Vise Cup - Moveable Jaw
Part Number: 13-106-01
Date Added: 5/25/2009
 

Method:  Mechanical Screw

Base Surface Area:  58 sq. in.

Bottom Seal:  12-150-25-11

Base Dimensions:  150 X 300 mm ( 5.91 X 11.81 in )


 


 
  • Allows material such as backsplashes to be stacked on edge for polishing or to hold block material in place during carving operations.
  • Allows material to be stacked on your table side by side and then calibrated and polished at one time.(Polishing requires a floating head or spring loaded tool holders).
  • Clearance over top of jaw is 3.375" (85mm)
  • Non-marking rubber.
  • Used in conjunction with the Vise Cup - Stationary Jaw.


Vise Cup - Stationary Jaw
Part Number: 13-106-02
Date Added: 5/25/2009
 

Base Surface Area:  58 sq. in.

Bottom Seal:  12-150-25-11

Base Dimensions:  150 X 300 mm ( 5.91 X 11.81 in )


 

  • Allows material such as backsplashes to be stacked on edge for polishing or to hold block material in place during carving operations.
  • Allows material to be stacked on your table side by side and then calibrated and polished at one time.(Polishing requires a floating head or spring loaded tool holders).
  • Clearance over top of jaw is 3.375" (85mm)
  • Non-marking rubber.
  • Used in conjunction with the Vise Cup-Moveable Jaw
  • Non-marking rubber

  


Intermac Tool Fork
Part Number: 14-200-01
Date Added: 5/21/2009
 


  • Replacement tool fork for Intermac machines.
  • Tool Holder(Cone) NOT included.


Manifold Cup-200 X 200 mm (7.87 X 7.87 in)
Part Number: 21-200-10
Date Added: 5/15/2009
 

Top Surface Area:  57.5 sq. in.

Base Surface Area:  57.5 sq. in.

Top Seal:  12-200-10-04

Bottom Seal:  12-200-10-11


 

  • 2 large incoming vacuum ports(10-14mm), 8 pairs of outgoing vacuum ports with plugs included.
  • Allows cleaner setups by reducing the amount of tubing on the table.
  • Ideal for FabCenter setups.
  • This cup can be made at ANY height and is available in most popular fitting sizes.

 


Manifold Cup-150 X 150 mm (5.91 X 5.91 in)
Part Number: 21-150-10
Date Added: 5/14/2009
 

Top Surface Area:  31.25 sq. in.

Base Surface Area:  31.25 sq. in.

Top Seal:  12-150-10-04

Bottom Seal:  12-150-10-11


 

  • 2 large incoming vacuum ports(10-14mm), 8 pairs of outgoing vacuum ports with plugs included.
  • Allows cleaner setups by reducing the amount of tubing on the table.
  • Ideal for FabCenter setups.
  • This cup can be made at ANY height and is available in most popular fitting sizes.

 


Manifold Cup-150 X 150 mm (5.91 X 5.91 in)
Part Number: 21-150-10
Date Added: 5/14/2009
 

Top Surface Area:  31.25 sq. in.

Base Surface Area:  31.25 sq. in.

Top Seal:  12-150-10-04

Bottom Seal:  12-150-10-11


 

  • 2 large incoming vacuum ports(10-14mm), 8 pairs of outgoing vacuum ports with plugs included.
  • Allows cleaner setups by reducing the amount of tubing on the table.
  • Ideal for FabCenter setups.
  • This cup can be made at ANY height and is available in most popular fitting sizes.

 


Go directly to Page: | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | Previous Page   Next Page Page 6 of 51
 
2245 Laguna Canyon Road, Laguna Beach, CA 92651 USA, (949) 499-5026, Fax (949) 499-1398  
E-Mail:info@blickindustries.com     Blick Industries on LinkedIn