Suction Cups Supports ClampsLocation DevicesFencesManifoldsAir FittingsAccessoriesRepairsCustomer ServicesProduct CatalogBlick Industries Resellers


View All Videos VIDEOS           PHOTOS
New Products
Go directly to Page: | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | Previous Page   Next Page Page 30 of 51
Mechanical Clamp Dual
Part Number: 13-102-02
Date Added: 3/1/2002
 

Method:  Dual Mechanical Screw

Range:  Specify thickness of material you will be holding.

Clamping Area:  1.5 in width X 1.25 in depth ( 38.1 X 31.75 mm )

Base Surface Area:  58.7 sq. in.

Stop Diameter:   39 mm (5.535 in)

Bottom Seal:  13-102-02-11


Available in ANY height and most popular fitting sizes.
 
Dual clamps provide increased clamping area. These clamps are very effective when seaming through the middle of sink cut-outs.
 


Vacuum Fence - 150 X 250 mm
Part Number: 15-101-01
Date Added: 3/1/2002
 

Fence Height:  135mm

Base Surface Area:  22.2 sq. in.

Bottom Seal:  15-101-01-03

Base Dimensions:  150 X 250 mm (5.91 X 9.84 in)

 

  View Photos

 

  View Videos

 

Other heights available upon request.
 
Used to locate workpieces and provide extra support by preventing workpieces from being pushed laterally.
 


Vacuum Fence - 150 X 300 mm
Part Number: 15-101-02
Date Added: 3/1/2002
 

Fence Height:  135mm

Base Surface Area:  44.83 sq. in.

Bottom Seal:  15-101-02-03

Base Dimensions:  150 X 300 mm (5.91 X 11.81 in)

 

  View Photos

 

  View Videos

 

Other heights available upon request.
 
Used to locate workpieces and provide extra support by preventing workpieces from being pushed laterally.
 


Low Profile End Cap - 22mm Recessed
Part Number: 14-102-01
Date Added: 2/1/2002
 

Mounting Shaft Diameter:
Mounting Screw:
OD:

22 mm
M10 Flat Head
63.5 mm



Low Profile End Cap - 22mm Extended
Part Number: 14-102-02
Date Added: 2/1/2002
 

Mounting Shaft Diameter:
Mounting Screw:
OD:

22 mm
M10 Flat Head
63.5 mm



Low Profile End Cap - 35mm Recessed
Part Number: 14-102-03
Date Added: 2/1/2002
 

Mounting Shaft Diameter:
Mounting Screw:
OD:

35 mm
M10 Flat Head
63.5 mm



Low Profile End Cap - 35mm Extended
Part Number: 14-102-04
Date Added: 2/1/2002
 

Mounting Shaft Diameter:
Mounting Screw:
OD:

35 mm
M10 Flat Head
63.5 mm



Vac-Stop Plus - Vacuum Back Stop
Part Number: 11-102-01
Date Added: 1/9/2002
 

Machine Height:  213 mm

Base Surface Area:  26 sq. in.

Stop Diameter:   40 mm (1.57")

Bottom Seal:  11-102-01-11

Base Dimensions:  165 mm Ø (6.50") Diameter

For Intermac Plus Machines.
 
Available in most popular fitting sizes.
 


Go directly to Page: | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | Previous Page   Next Page Page 30 of 51
 
2245 Laguna Canyon Road, Laguna Beach, CA 92651 USA, (949) 499-5026, Fax (949) 499-1398  
E-Mail:info@blickindustries.com     Blick Industries on LinkedIn