Suction Cups Supports ClampsLocation DevicesFencesManifoldsAir FittingsAccessoriesRepairsCustomer ServicesProduct CatalogBlick Industries Resellers


View All Videos VIDEOS           PHOTOS
New Products
Go directly to Page: | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | Previous Page   Next Page Page 3 of 51
Leatherhead
Part Number: 14-500-03
Date Added: 1/24/2013
 
 

  View Videos

 

Use your CNC Router or *CNC Bridgesaw to Leather your stone. The Leatherhead adapts to any 35mm Conic tool holder. It accepts Frankfurt Style brushes or 4", 5" and 6" snail lock brushes. It can be used on belt driven and Electro-Spindle machines.

  • Tool Diameter: 12.75" or 324 mm
  • Tool Weight: *Approximately 16.5 lbs
  • Overall Length: *2.625" or 67 mm
  • Dimensions and Weight are for the tool only and they do not include the brushes or tool holder. Customer to supply tool holder and brushes. Customer to specify through bolt size, M10 or M12.
  • Starting Feeds and Speeds: 100"/minute(2540mm/min), Spindle 1000-1200RPM, < 1500RPM.
  • Pressure: Press down until bristles on brush start to flex. No more than 1/8".



100 X 100 mm (3.94 X 3.94 in)
Part Number: 12-100-10
Date Added: 11/14/2011
 

Top Surface Area:  10 sq. in.

Base Surface Area:  10 sq. in.

Bottom Seal:  12-100-10-04

Bottom Seal:  12-100-10-11

This cup can be made at ANY height and is available in most popular fitting sizes.


250 X 250 mm (9.84 X 9.84 in)
Part Number: 12-250-10
Date Added: 11/14/2011
 

Top Surface Area:  87 sq. in.

Base Surface Area:  87 sq. in.

Bottom Seal:  12-250-10-04

Bottom Seal:  12-250-10-11

This cup can be made at ANY height and is available in most popular fitting sizes.


8 Pair Portable Manifold
Part Number: 21-103-01
Date Added: 3/1/2011
 

Specifications:
 - ~ Dimensions: 8.5" Width x 20" Length x 4" Height
 - 16 Total ports, 2 chamber.
 - 2 Liquid filled combo gauges - Vacuum 0-30HG, Air Pressure 0-150 psi.
 - Stainless steel handles.
 - No scratch rubber pad on bottom.
 - Most popular fitting sizes available.
   - Incoming lines 12mm or 1/2", other sizes available upon request.
 
Place this manifold anywhere on your CNC.


200 X 250 mm Setup Cup
Part Number: 12-200-20
Date Added: 9/2/2010
 

Top Surface Area: 77.46 sq. in.

Base Surface Area: 57.5 sq. in.

Top Seal:  12-200-10-04

Bottom Seal:  12-200-10-11


Available in ANY height and most popular fitting sizes.
Use this cup to setup parts on your machine by laying the edge of the granite on the overhanging ledge. This will save your seals from wearing out.


120 mm Round Stone
Part Number: 12-120-03
Date Added: 8/31/2010
 

Top Surface Area:  ~13 sq. in.

Base Surface Area:  ~13 sq. in.

Top Seal:  12-120-03-04

Bottom Seal:  12-120-03-11

Helpful Ordering Information
 
This cup can be made at ANY height and is available in most popular fitting sizes.
 


Venturi 5 Port Manifold
Part Number: 21-501-01
Date Added: 4/12/2010
 

Approximate Dimensions: 125 X 290 X 40mm (5" X 11.5" X 1.6")
Air Fitting Sizes: 6mm, 8mm, 10mm, 12mm, 1/4",3/8", 1/2"
 
For applications where a vacuum pump does not exist. Only a compressed air line is needed. Contains 1
compressed air input port and 5 output vacuum ports. Recommended air requirements 1.5 CFM @ 80 psi.


Vertical Holding Cup - 500 mm Length
Part Number: 12-400-10
Date Added: 2/18/2010
 

Fence Height:  90mm (3.54")

Fence Surface Area:  40 sq. in.

Base Surface Area:  66.3 sq. in.

Base Dimensions:  150 X 500 ( 5.91 X 19.69 in )

Top Seal:  12-400-10-04

Bottom Seal:  12-400-10-11

 

  View Photos

 

  View Videos

 


Allows long strips of material to be held vertically and cut down thinner. (i.e. 3cm to 2cm) Recommended 4 cups for 10 ft lengths of material. Has a soft rubber bottom seal for sealing on surfaces that are not smooth.

Multiple mounting options.
Option 1: Using thru holes for rigidly mounting the base to a table.
Option 2: Vacuum the base down to the table.

A vacuum source will be needed.
Recommended: Venturi 5 Port Manifold


Go directly to Page: | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | Previous Page   Next Page Page 3 of 51
 
2245 Laguna Canyon Road, Laguna Beach, CA 92651 USA, (949) 499-5026, Fax (949) 499-1398  
E-Mail:info@blickindustries.com     Blick Industries on LinkedIn