Suction Cups Supports ClampsLocation DevicesFencesManifoldsAir FittingsAccessoriesRepairsCustomer ServicesProduct CatalogBlick Industries Resellers


View All Videos VIDEOS           PHOTOS
New Products
Go directly to Page: | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | Previous Page   Next Page Page 16 of 51
Single Vacuum Generator Kit
Part Number: 01-501-01
Date Added: 2/10/2004
 

These vacuum generation systems are a cost effective solution for a small to medium sized applications. They generate vacuum by passing compressed air through an internal nozzle. These systems have a limited capacity and should not be used with porous materials. They also require that your suction cups and manifolds be well maintained and free of extensive leaks.
 
TUBING NOT INCLUDED.
 


Vacuum Generator Rebuild Kit
Part Number: 01-501-01-01
Date Added: 2/10/2004
 

Contains all the gaskets necessary to rebuild each generator. (2 are needed to rebuild the dual)


Dual Vacuum Generator Kit
Part Number: 01-501-02
Date Added: 2/10/2004
 

These vacuum generation systems are a cost effective solution for a small to medium sized applications. They generate vacuum by passing compressed air through an internal nozzle. These systems have a limited capacity and should not be used with porous materials. They also require that your suction cups and manifolds be well maintained and free of extensive leaks.
 
TUBING NOT INCLUDED.
 


1.5 in Compound Oil Filled Gauge
Part Number: 56-15C18BKF
Date Added: 2/10/2004
 

Corrosion resistant stainless steel and brass construction. Replacement gauge for the 8 Pair Portable Manifold, and the 16 Pair Portable Manifold Universal with gauges.


Oil Filled 2.5 in Vacuum Gauge
Part Number: 56-25V14BTF
Date Added: 2/10/2004
 

Corrosion resistant stainless steel and brass construction. Replacement gauge for the single and double vacuum generator kits.


50 X 300 mm ( 1.97 X 11.81 in )
Part Number: 12-050-12
Date Added: 2/2/2004
 

Top Surface Area:  17 sq. in.

Base Surface Area:  64.25 sq. in.

Top Seal:  12-050-12-04

Bottom Seal:  12-050-12-11

Base Dimensions: 150 X 300 mm ( 5.91 X 11.81 in )

Base Dimensions: 50 X 300 mm ( 1.97 X 11.81 in )

Excellent cup for supporting narrow thin fragile areas(Sink rails).
 


Denver 120 mm Slot Clamp Assembly
Part Number: 13-105-06
Date Added: 1/3/2004
 

Dimensions:

Height:
Bolt Size:
Brass Tee Nut

50mm X 120mm (1.97in X 4.72in)
15mm ( 0.59in )
M10 Hex Head
10mm


Use these clamps to hold any of our products on Denver machines with slotted tables.


Go directly to Page: | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | Previous Page   Next Page Page 16 of 51
 
2245 Laguna Canyon Road, Laguna Beach, CA 92651 USA, (949) 499-5026, Fax (949) 499-1398  
E-Mail:info@blickindustries.com     Blick Industries on LinkedIn