Suction Cups Supports ClampsLocation DevicesFencesManifoldsAir FittingsAccessoriesRepairsCustomer ServicesProduct CatalogBlick Industries Resellers


View All Videos VIDEOS           PHOTOS
New Products
Go directly to Page: | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | Previous Page   Next Page Page 15 of 51
Vacuum Breaker - 10 mm
Part Number: 53-103-10
Date Added: 3/3/2004
 

Breaks the vacuum which allows easy repositioning of suction cups and stops.


ER-25 Collet Holder X 1/2 in BSP Adaptor - 1.5 in Long
Part Number: 14-100-04
Date Added: 2/22/2004
 

Collet Style:
Capacity:
Overall Length:
Adaptor Thread:
Mounting Force to Cone:

ER-25
1/8" to 5/8"
1.5"
1/2" BSP
50 ft/lbs


Lets you use standard router bits.
 
Fits all toolholders with standard 1/2" BSP Female [1/2" Gas adaptor]
A torque wrench is recommended when mounting the collet holder to the cone. For mounting collets under 1/16", please use 60 ft/lbs. For mounting collets over 1/16" use 70 ft/lbs.


ER-25 Collet Holder X 1/2 in BSP Adaptor - 4.5 in Long
Part Number: 14-100-05
Date Added: 2/22/2004
 

Collet Style:
Capacity:
Overall Length:
Adaptor Thread:
Mounting Force to Cone:

ER-25
1/8" to 5/8"
4.5"
1/2" BSP
50 ft/lbs


Lets you use standard router bits.
 
Fits all toolholders with standard 1/2" BSP Female [1/2" Gas adaptor]
A torque wrench is recommended when mounting the collet holder to the cone. For mounting collets under 1/16", please use 60 ft/lbs. For mounting collets over 1/16" use 70 ft/lbs.


Collet ER-25 X 1/2 in
Part Number: 14-125-12
Date Added: 2/22/2004
 


Holds a tool with a 1/2 inch shank.
 


Collet ER-25 X 1/4 in
Part Number: 14-125-14
Date Added: 2/22/2004
 


Holds a tool with a 1/4 inch shank.
 


Collet ER-25 X 11/32 in
Part Number: 14-125-32
Date Added: 2/22/2004
 


Holds a tool with a 11/32 inch shank.
 


Collet ER-25 X 3/8 in
Part Number: 14-125-38
Date Added: 2/22/2004
 


Holds a tool with a 3/8 inch shank.
 


Collet ER-25 X 5/8 in
Part Number: 14-125-58
Date Added: 2/22/2004
 


Holds a tool with a 5/8 inch shank.
 


Go directly to Page: | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | Previous Page   Next Page Page 15 of 51
 
2245 Laguna Canyon Road, Laguna Beach, CA 92651 USA, (949) 499-5026, Fax (949) 499-1398  
E-Mail:info@blickindustries.com     Blick Industries on LinkedIn