Suction Cups Supports ClampsLocation DevicesFencesManifoldsAir FittingsAccessoriesRepairsCustomer ServicesProduct CatalogBlick Industries Resellers


View All Videos VIDEOS           PHOTOS
New Products
Go directly to Page: | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | Previous Page   Next Page Page 13 of 51
Brembana 31 mm Pin Stop
Part Number: 11-301-03
Date Added: 4/1/2004
 

Base Surface Area:  25.2 sq. in.

Stop Method:  31mm (1.22") Removeable Pin

Bottom Seal:  11-301-01-11

Base Dimensions:  150 mm Ø (5.91") Diameter


Available in ANY height and most popular fitting sizes.
 
For Brembana Concept 1700 Machines.
 


Brembana Stop (Reference Pin)
Part Number: 11-601-01
Date Added: 4/1/2004
 

Machine Height:  200 mm

Base Surface Area:  41 sq. in.

Stop Diameter:   35 mm (1.38")

Bottom Seal:  11-601-01-13

Base Dimensions:  200 mm Ø (7.87") Diameter


Available in most popular fitting sizes.12 mm diameter pin for referencing table.
 


Brembana Replacement Disc - 35 mm X 17 mm
Part Number: 11-601-01-17
Date Added: 4/1/2004
 

Replacement discs on both stops manufactured by Blick Industries and Brembana.
 


Brembana Replacement Disc - 35 mm X 27 mm
Part Number: 11-601-01-27
Date Added: 4/1/2004
 

Replacement discs on both stops manufactured by Blick Industries and Brembana. Extended height for locating already profiled edges.
 


Pneumatic Mushroom Clamp - Brembana Style
Part Number: 13-103-02
Date Added: 4/1/2004
 

Method:  Pneumatic Cylinder

Range:  .8 cm - 4.4cm with included spacer

Clamping Area:  Circular Ring 152mm OD X 70 mm ID ( 6 in OD X 2.75 in ID )

Base Surface Area:  42 sq. in.

Stop Diameter:   60 mm (2.36 in)

Bottom Seal:  13-103-02-11

Designed to interface with CMS Brembana Maxima and Speed Machines. Has a 12mm diameter pin in the base that fits into the table reference holes.
 


Pin Stop - 50 mm
Part Number: 11-301-01
Date Added: 3/3/2004
 

Location Method 1:  Stop Locator Tool

Location Method 2:  Laser(optional)

Stop Dim: 50 mm Ø X 123mm (1.97" X 4.84") Removeable Pin

Bottom Seal: 11-301-01-11

Base Surface Area: 25.2 sq. in.

Base Dimensions: 150 mm Ø (5.91") Diameter

 

  View Photos

 

  View Videos

 

Pin Stop Height is defined from underneath the vacuumed base to the top of the stop.

Pin Stop Heights
 Pin Stop Height = Suction Cup Height + 30mm
 105 mm = 135 mm (5.31")
 120 mm = 150 mm (5.91")
 140 mm = 170 mm (6.69")
 150 mm = 180 mm (7.09")
 160 mm = 190 mm (7.48")
 200 mm = 230 mm (9.05")

Available in ANY height and most popular fitting sizes.
 


Pin Stop - 50 mm Removeable Pin
Part Number: 11-301-01-03
Date Added: 3/3/2004
 

Replacement pin that fits on the Standard Pin Stop. Has a 7/16 inch hole for the Stop Locator Tool.
 


Pin Stop - 50 mm Removeable Pin w/Laser Target
Part Number: 11-301-01-07
Date Added: 3/3/2004
 

Replacement pin that fits on the Standard Pin Stop. Laser target fits in a 7/16 inch hole used for the Stop Locator Tool.
 


Go directly to Page: | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | Previous Page   Next Page Page 13 of 51
 
2245 Laguna Canyon Road, Laguna Beach, CA 92651 USA, (949) 499-5026, Fax (949) 499-1398  
E-Mail:info@blickindustries.com     Blick Industries on LinkedIn